Panasonic Matsushita electrolytic capacitor SU series, 47uf 25v (2.5mm pitch). Good quality capacitor for repairs and general purpose use. New unused stock.

Price is for 30 pieces.

If you are ordering from outside the United Kingdom please select International Shipping during the checkout process.

N13T1 programmable UJT. Used in early Roland machines, System 100, SH-3A, SH-5 etc. New old stock.

Price is for 1 piece.

Important - if you are ordering from outside the United Kingdom please select International Shipping during the checkout process.

Roland SH-101 replacement power switch. Original Alps latching switch, a rare part and genuine new old stock. 8 pin PCB mount. Roland part number SUT113.  Failing power switches are probably the most common fault on the otherwise very reliable SH-101, usually resulting in unstable pitch and voltage controlled parameters.

Limited stock - be quick if you need this part

It’s a fairly straightforward job to replace the power switch but please only attempt it if you’re confident you have the skills to do so - if in doubt ask a synth tech to do the work for you.

If you are ordering from outside the United Kingdom please select International Shipping during the checkout process.

Latching push switch for Roland Juno 6 and 60 “Hold” and “Arpeggiator On/Off” functions. Original Alps 6 pin pcb mount switch NOS. Roland part number SUT11A-2.

Requires soldering. Please only attempt switch replacement if you are confident you have the skills to do so. If in doubt ask a synth tech to do the work for you.

Price is for 1 piece.

If you are ordering from outside the United Kingdom please select International Shipping during the PayPal checkout process.

Replacement backup battery holder originally designed for the Roland Juno 60 but suitable for many machines where you might want to move the battery location to somewhere more accessible or to reduce the risk of any leaks onto sensitive PCBs. Intended for machines that use non-rechargeable batteries but can also be used to replace NiCads/NiMH type batteries with small circuit modifications (Polysix, JP-4 etc) - but please make sure you have the experience to do this before attempting the installation.

Fitted with a two pin Molex header & wiring for easy connection and check points to test battery voltage. Mounting location can be chosen by the user to suit his/her own requirements. PCB size 36 x 44mm.

Requires soldering and a good understanding of the circuit specific to your machine - only attempt installation if you are confident that you have the skills to do so. If in doubt, ask a synth tech to do the work for you.

Available with either CR2032 coin cell or higher capacity 1/2AA lithium battery included.

If you are ordering from outside the United Kingdom please select International Shipping during the PayPal checkout process.

Large head M4 machine screw, suitable replacement for Roland CR-78 & 68 chassis to casing fixings, although the head is marginally smaller than the originals. A useful screw for many other pieces of vintage equipment where a large dome headed fixing is used. Black zinc finish, 16mm length.

Price for pack of 8.

Pack of 10 red LEDs, 4mm. These are ‘new old stock’ components, suitable replacement part for Roland CR-68 and CR-78 - these machines use the uncommon size 4mm LEDs which are becoming difficult to find in the correct dark red colour. Useful if you’re restoring one of these great machines.

Price is for 10 pieces.

SOLD OUT

If you are ordering from outside the United Kingdom please select International Shipping during the checkout process.

Replacement fuse holder assembly for Sequential Circuits Pro-One, Prophet 5 etc. Square, snap-in panel mount chassis with push-release fuse holder for 32mm fuse. Colour: Red.

This item is available to order. Contact me if you require this part.

if you are ordering from outside the United Kingdom please select International Shipping during the checkout process.

Latching push switch for Roland Juno 6. Part number SUT32A, original Alps Japan part, new old stock. 6 pin PCB mount switch for waveform select function on the Juno 6 (NOT suitable for Juno 60). Limited quantity only.

if you are ordering from outside the United Kingdom please select International Shipping during the checkout process.

3mm red LED, standard brightness, with collar. These are NOS, high quality and are a suitable replacement part for vintage gear from Roland, Boss, Korg etc where you want an LED that is in keeping with the era - not a modern super bright type. I've spent a lot of time trying to find replacement LEDs that are suitable for vintage gear and these are ideal if aesthetics are important to you. These have the little collar at the base of the LED that many modern types don't have - this can help with alignment and is useful if the LED sits on a spacer. Green LEDs also available HERE.

Price is for pack of 10.

I have an alternative 3mm red LED without the collar HERE