DP3T 3 position slide switch (UID). PCB mount switch suitable for Sequential Circuits Pro-One, Prophet 600 etc. These are new old stock and unused. First I must point out that these are NOT identical to the original switches used by Sequential Circuits - slightly different case style to the originals but mechanically correct. These switches will also fit various Moog synths including Prodigy, Micromoog & Multimoog but please note that the actuator lever is shorter than the original switches used by Moog and some creativity is needed to raise them above the pcb to obtain the correct height - not ideal, I know, but if you're in a pinch...

PCB pin pitch is 1/4" (6.35mm).

It's possible that these switches will fit other equipment that uses standard size PCB mounted slide switches so I've included pictures of the switch measurements... please check your requirements carefully. Any questions, just ask.

I'm offering these switches in the hope that they may help you out with repairs - finding original slide switches is becoming very difficult. As I can't guarantee that they will fit your particular synth I'm happy to accept returns and provide a refund.

Cinch-Jones panel mount connector - female - suitable replacement part for many vintage Moog synthesizers.

*Currently Out Of Stock*

Cinch Jones P302H-AB panel mount 2 pin connector for Moog equipment. Male connector for S-Trig output on many vintage Moog Synthesizers - Minimoog, Micromoog, Multimoog etc.

*Currently Out Of Stock*

Momentary push button switch with red cap. Used in many Roland machines including TR-808, System 100m, System 100 Model 101, SH-3a etc. These are original Japan made switches, PCB mount with a 'push to make' action, very close match to the original Roland switches. Although I'm listing these as "used" they have been removed from un-used midi interfaces so may have traces of solder on the pins - but have not seen any action. It's quite hard to find good quality replacement switches of this type and if keeping your gear as original as possible is important to you these may be of interest.

Note: These switches do not come with panel mounting nuts - they are PCB mount. Contact me if you need panel mount nut/washer.

SOLD OUT - limited number available again soon - contact me if you need this switch.

Pack of 14 machine screws for Roland Jupiter 8 and 6 side/end panel fixing. Very high quality stainless steel oval dome head screws to replace the missing or mis-matched screws on your Jupiter side panels. 

Set of 14 screws supplied, 7 per side.

*IMPORTANT* If you are ordering from outside the U.K please select “International Shipping” during the PayPal checkout.

Pack of 2 4011UB un-buffered NAND gate for Boss DR-55 and other similar machines that specifically require the unbuffered version. Devices are 'new old stock' and unused. Manufacturers include Motorola, Toshiba, On Semi etc. I will supply the current brand I have in stock. 

I also have 4520BP counters and 5501P static ram ICs for these machines plus transistors and other parts in stock - contact me if you need anything specific for your DR-55.

Rubycon electrolytic capacitor 1000uf 35v. 5mm pitch 25mm x 13mm radial. Quality replacement power supply filter capacitor suitable for many vintage machines that specify 1000uf 35v radial capacitors in the psu - very common in many 70s and 80s synths and drum machines from Roland, Korg etc. I have other values available if required.

Price for 4pcs..

Replacement 5mm red LED suitable for many Moog, Sequential Circuits, ARP and other machines. These are new old stock components, very nice red colour and less "orangey" than modern LEDs... if aesthetics are important to you these are a nice replacement if your original LED has died. Sold in packs of 10.

Note: These are 5mm leds. Suitable for Moog Prodigy, Source, Rogue etc, Sequential Circuits Pro One, ARP Odyssey, Axxe, Sequencer etc, E-mu Drumulator, Emulator etc. For 3mm leds see HERE

Replacement set of 3 screws for fixing the mod wheel panel to the chassis on the Korg Polysix and MonoPoly synthesizers, often missing. Set contains 2 long stainless steel machine screws with washers and 1 self tapping screw.

*IMPORTANT* If you are ordering from outside the U.K please select “International Shipping” during the PayPal checkout.

Pack of 10 plastic 2 piece snap rivets for Roland SH-09, SH-2, RS-09, SA-09 and more. These are used to attach the PCB frame to the front panels and are commonly missing - resulting in loose panel controls. Also used on early model Jupiter 4 control panel and all JP-4 bender panels.