6 pin DIN cable for connecting the 100m keyboards to the cabinets 190 & 191J. Also connecting cabinets together for common CV and gate signals. Length 2.0m. LIMITED STOCK

*IMPORTANT* If you are ordering from outside the U.K please select “International Shipping” during the PayPal checkout.

Stereo 6.35mm (1/4") jack to two 6.35mm mono jacks. Length 2m. Provides access to key cv and gate functions on the Cat & Kitten synthesizers. 'Tip' is gate (red plug), 'Ring' is CV (black plug). Limited stock.

Sold Out

Set of 5 slim-line patch cables - 3.5mm mono jack to jack, moulded plugs, length 1.2m - ideal for general CV/gate connections and useful when patching rack to rack.

Nice quality set of five moulded patch cables ideally suited to Korg's original MS series semi-modular synthesizers (MS-10, 20, 50). Standard 1/4" (6.35mm) mono jacks. 2 x 25cm, 2 x 35cm, 1 x 50cm cables.

Moog S-Trig cable - 2 pin Cinch-Jones plug (male) to 3.5mm mini jack with 6.35mm (1/4") adaptor. Slim, shielded cable. Ideal for connecting to Midi CV converters, modular synths and sequencers. Available in 2m and 3m lengths.

Due to the increase in cost of the Cinch-Jones plugs I no longer stock these cables as standard. I can, however, provide them as a special order item. Contact me for availability.

Contact me if you require a different length or would prefer standard 1/4" jack.

*IMPORTANT* If you are ordering from outside the U.K please select “International Shipping” during the PayPal checkout.

DCB (Digital Communication Bus) cable (H172) for use with Roland Juno 60, Jupiter 8* (later models), MD-8, OP-8, MSQ-700 and some Kenton modified Juno 6. Available in 2m or 3m lengths. This is a 'One Way' cable allowing data transfer from one unit to another - for example MD-8 to Juno 60. If you want to have the Juno controlling the MD-8 you need to swap the cable around. This is a suitable cable if the required direction is usually one way. If you require data transfer in both directions the Bi-Directional DCB cable is a better choice.

currently out of stock - available again soon.

Si vous achetez de l'extérieur de l'U.K s'il vous plaît n'oubliez pas de choisir "expédition internationale" lors de la caisse paypal

*IMPORTANT* If you are ordering from outside the U.K please select “International Shipping” during the PayPal checkout.

DCB (Digital Communication Bus) cable (H165) suitable for Roland Juno 60, Jupiter 8* (later models) , MD-8, OP-8, MSQ-700 and some Kenton modified Juno 6. Available in 2m or 3m lengths. This is a Bi-Directional cable allowing data transfer in both directions and is more convenient than the standard cable if you want to use your Juno or Jupiter keyboard to play one another or input data to your MSQ-700 or MD-8 without the need to swap the cable around. (Note that some circumstances when using the MD-8 produce "echo-back" as DCB equipped synths will send back out any received data. Changing modes on the MD-8 may be necessary).

Currently out of stock - available again soon.

Si vous achetez de l'extérieur de l'U.K s'il vous plaît n'oubliez pas de choisir "expédition internationale" lors de la caisse paypal

*IMPORTANT* If you are ordering from outside the U.K please select “International Shipping” during the PayPal checkout.

CV & gate patch cord, set of 2 cables. 3.5mm mono jack to 6.35mm mono jack, moulded plugs. Available in 1,2, or 3m sets. Ideal for general CV connection between equipment. Perfect for integrating vintage synths, sequencers and drum machines with modern eurorack modular gear, midi to CV converters, clock & trigger signals and many other uses.

Also available individually HERE

Si vous achetez de l'extérieur de l'U.K s'il vous plaît n'oubliez pas de choisir "expédition internationale" lors de la caisse paypal

CV and gate patch cords, set of 4 cables. 3.5mm mono jack to 6.35mm mono jack, moulded plugs, Available in 1, 2 or 3m lengths. Ideal for general CV connection between equipment. Perfect for integrating vintage synths, sequencers and drum machines with modern eurorack modular gear, midi to CV converters, clock & trigger signals and many other uses.

Si vous achetez de l'extérieur de l'U.K s'il vous plaît n'oubliez pas de choisir "expédition internationale" lors de la caisse paypal

CV and gate patch cord, set of 8 cables. 3.5mm mono jack to 6.35mm mono jack, moulded plugs. Available in 1, 2 or 3m lengths. Ideal for general CV connection between equipment. Perfect for integrating vintage synths, sequencers and drum machines with modern eurorack modular gear, midi to CV converters, clock & trigger signals and many other uses.

Si vous achetez de l'extérieur de l'U.K s'il vous plaît n'oubliez pas de choisir "expédition internationale" lors de la caisse paypal